LINE INTERACTIVE UPS  

1000F Line Interactive Series Model 1052F 1062F 1082F Input Voltage Window 100/120/220/230/240VAC Nominal-35% / + 20% Frequency 50Hz or 60Hz (43-67 AUTO TRACE)         Inv. O/P Waveform PWM Simulated Sinewave Frequency     50Hz or 60Hz (43-67 AUTO TRACE) Capacity 520VA 620VA 820VA Regulation +/- 3% Transfer Time 2ms typical; 5ms maximum Battery Types Lead-acid maintenance-free DC Bus 12V / 7.2A 12V / 7.2A 12V / 9A Number 1PCE 1PCE 1PCE Regulate Time typically 8 hours to 90% charged Run Time 6-20 minutes depending on load connected Protection Over / Under Volt. Overload / Short Low Battery switch to Bat. O/P when Mains over regulation range fuse & current limited for both Mains and Battery modes Two stages ; no battery drain after cut off Surge Meets IEEE587 Cat. A Noise Filtering EMI - RFI full time suppression Mechanical Socket Type IEC, NEMA5-15R Socket No.(pcs) 6PCS NEMA5-15R, 4PCS IEC Dim(W X H X D) mm 100 X140 X 320 Weight(kgs) 6.5 7.5 9 Shipping 7 8 9.5 Environment Ambient 0-40 degree C, 0-90% non-condensing Audible less than 35 dBA (1M distance) WarningSignals LED on Front Beeping Alarm AC Normal:Green Steadily; Backup; Red Light on Battery, Battery Low and Overload Communication Port RS232; Cable for DOS / Windows 95, 98 2000, NT , Novell, Unix applications Cold Start It enables to activate UPS without Utility Power Applications for 586, 686, Pentium 4, Power PC, CAD / CAM engineering workstations, minicomputer, multi servers, telecom equipment, etc.

(A)Main SWITCH:On/off the UPS
(B)Green LED:AC Utility is normal
(C)Red LED:Inter mode
(D)Backup Outlets: Output via transformer
(E)Surge Outlets:Surge protection
(F)RJII jacks:fax/modem protection
(G)Communication port
(H)No Fuse breaker
(I)Inter Power Cord

 ON-LINE UPS  

2000ES True RS232 OnLine UPS
Model No.	2100ES	2150ES	2200ES	2300ES
Power Capacity	1000VA	1500VA	2000VA	3000VA
Input Voltage Range	110Vac or 220Vac25%
Input Frequency	50Hz or 60Hz 5%
Output wave form	PWM Pure Sinewave
Voltage regulation (inverter)	1% at output rating
Frequency regulation (inverter)	0.5%
THD	Within 3% at 100% linear load
Synchronization	1Hz/sec slew rate; Inv. Free running when I/P Hz over 5Hz
Crest Factor	3 : 1
Power Factor	0.7
Efficiency	>=85%
DC Bus	36Vdc	48Vdc	60Vdc	84Vdc
Mechanical	Four IEC or NEMA5-15R outlets (Germany and UK outlets are available), One inletRJ11 phone jack for telephone line protectionOne DB-9 connector for true RS232 communication One DB-9 connector for dry contact6 LED indicators for various working conditionsBeeping alarm on battery low, overload, UPS fault and AC input fault Battery terminal for extended backup time purpose
Function & Feature	True RS232 protocol provided for smart monitoring to utility,UPS and Battery conditions and scheduling on/off etc¡K..Complete isolation via isolation transformerDouble conversion device

 APOLLO 1000R SERIES (19" RACK MOUNT)  

 

MODEL		R-1100	R-1150
Output Capacity
Battery	Bat. Voltage	24Vdc
	Full load backup time	10 minutes
	Recharging Time	8 hours to 90% charged
	Type	Sealed, Lead-acid maintenance free
Input	Voltage	110Vac or 220Vac25
	Frequency	60Hz or 50Hz1%
Output Capacity	Voltage	AC Built-in AVR stabilize
	Frequency	60Hz or 50Hz1Hz
Output wave from		Pseudo sine wave (P.W.M.)
Protection		Output short circuit-overload protection w/current limit
Transfer Time		2ms
LED Indicators on front panel :
Battery level display		Green LED barograph to indicate the level of battery reserve
Operation indicators		Green light : normal
		Orange light + flash : electricity is abnormal or interupted
		Orange light + quick flash : battery is completely discharged
		Red light : overload or short circuit
Audible alarms :
Beep		4 seconds interval beeps : power failure
		1 seconds interval beeps : Low Battery
		Continuous Beeps : UPS is abnormal
Others :
Environment		Temperature : 0¢J~40¢J Humidity : 0%~95%
Dimensions		433*482*86mm (2U)
Weight		20 Kgs	22 Kgs
Warranty		3 Years
Communication		DB-9 Port or USB Port