RECTIFIERS-CHARGERS-AND STAND BY POWER SYSTEMS  

Applications  

RANGE OF PRODUCT

• Single Phase Standard 110-600 Vac
• Three Phase Standard 208-600 Vac
• 60 Hz And 50 Hz
• Dc Out Put 12v,24v,32v,36v,64v 48v,120v,240v
• Current Out Put From 5 Amps To 400 Amps<
• Any Other Sizes And Ratings Are Also Available Other Than Standard Range
  

ADDITIONAL SPECIALTY OF CIGENTEC

• Tailoring Enclosures Size And Configuration For Optimum Space Usage At Lowest Possible Cost.
• Virtually Any Size Shape And Finish On Custom Basis.
• Compatibility For The Different Environment From Arctic To Tropic
• Battery Chargers Designing With The Combination Of Standard Modules And As Well As Specific Design Requirement
• From The Customer.

YOUR SPECIFICATIONS-CUSTOM BUILT

• STANDARDS
• CSA C22.2-107,UL1236,NEMA PE-5,NEMA PE-7
• IEC,IEEE,DIN,BS,VDE,LLOYD’S,ABS AND OTHER STANDARDS AS REQUIRED
  

 Rectifiers : Single Phase Input, Three Phase Input  

Standard Features

• Input Fuse and switch, or breaker.
• Rectifier fuse.
• Standard terminal sequence.
• Extruded aluminum heat sinks.
• Plug-in printed control module.
• Regulated to +/- ½% of set voltage for line variations +/- 10% and load variation of 0-100%.
• Capable of parallel operation.
• Automatic current limiting 20% to 120%.
• Reverse polarity protection.
• Manual Equalize switch with pilot lamp.
• Separate float / equalize and current adjustment pots.
• DC voltmeter and ammeter
• Convection cooled.

Optional Features

• Special Input voltage.
• Special Input frequencies.
• Wall, rack or floor mounting for any capacity.
• Manual voltage and/or current Adjustment.
• Low and /or high voltage alarms.
• DRY CONTACT ‘C’ is available.
• AC Fail alarms with/or without time delay.
• Ground Fault alarm.
• Special or 1% meters.
• Output filtered to any level (LC Grade Filter)
  

FOR MORE INFORMATION CONTACT OUR MARKETING DEPT.